I seem to have this magic $200 pricepoint barrier below which I buy anything that I can give an IP address on my LAN. A $50 Philips discount plus a corporate partnership discount brought it under $200 for me. It bugged me that my Linksys Media Applicance box only does Audio and Images and even though it has network support it doesn't make use of that to talk to the Internet in any way. Philips has thought things through a bit better. The Streamium can be used in 2 modes. They call it Internet and PC-Link. In PC-Link mode it is similar to the Linksys in that it uses Intel's UPnP Media Server protocol to fetch content from a local server and in Internet mode it connects to a number of online content services including Yahoo, Radio Free Virgin, Playhouse Radio, Andante and many others. You can also feed it your own streaming sources. Note though that it doesn't support WMA nor ASF so it can't stream from a number of Windows-centric streaming services.
It has both a 10/100 port and 802.11g support. I already have a WRT54G sitting on top of my TV so I just plugged it into that, but I did try the wireless config and it worked easily. Plugged in my WEP key and off it went. The Philips Media Manager software that comes with it is however horrible. It is this big Java mostrosity that chews up a whack of RAM and as far as I can tell only runs on Windows. Go figure. Luckily Philips didn't restrict the Streamium to their own media manager. You can install any UPnP media server you want. I prefer a little tiny one called TwonkyVision. It doesn't have a GUI but instead takes the sane approach and has a web interface. And it isn't written in Java so it is portable(!?) It runs well on OSX, Linux and Windows.
The TV interface seems a little clunky to me. It is somewhat hard to navigate and it seems to flicker a bit. I don't think it is me or the TV because the TiVo onscreen interface is rock-solid without any flicker at all. The online part of this at my.philips.com is also not great. It's not bad, but it seems like they could do a lot more with it. That's where you go to configure what the Internet portion of the device should connect to. I like the fact that no local machine needs to be available to use or configure the Internet side of it. Just go to the web site and choose which streams, video and photo services to use. Hook this thing up to an LCD hanging on a wall and configure it to show your Yahoo Photos or galleries from Lex Fletcher's Born to Shoot site and you have a pretty nice dynamic picture frame.
Prodding it just a little bit shows the following:
PORT STATE SERVICE 80/tcp open http 1720/tcp filtered H.323/Q.931 8080/tcp open http-proxy
And the web server returns:
200 OK Cache-Control: no-cache Connection: close Server: Allegro-Software-RomPager/4.30 Content-Type: text/xml Expires: Thu, 26 Oct 1995 00:00:00 GMT Client-Date: Sat, 04 Dec 2004 16:11:14 GMT Client-Peer: 192.168.1.106:80 Client-Response-Num: 1
followed by a bunch of XML which looks like a normal UPnP Media response. Interestingly enough it looks like other devices can use this one as their UPnP Media source. I am sure that is in the spec somewhere, but I never realized that before that these things could be used as media relays.
All in all it is a cool little device.